Installation Guide

3
WARNINGS/SAFETY
WARNING
Risk of Fire or Electric Shock
Disconnect power at the circuit breaker(s) or disconnect
switch(es) before installing or servicing.
Installation and/or wiring must be in accordance with
national and local electrical code requirements.
Only use copper conductors rated 105°C minimum.
Battery is not user replaceable.
Do NOT use timer to control devices that could have
dangerous consequences due to inaccurate timing, such as
sun lamps, saunas, heaters, and slow cookers.
NOTICE
Dispose of product per local regulations on the disposal of
lithium batteries.
Ratings
1
Operating Voltage 120 VAC, 50/60 Hz
General Purpose 15 A
Inductive Ballast 15 A
Tungsten/Incandescent 8 A
Electronic Ballast/LED Driver 5 A
LED Load 600 W
Motor Load 1 HP
Dimensions 2 3/4" H x 1 3/4" W x 1 1/3" D
1
Type 1.C Action Operating Control, Pollution Degree 2, Impulse Voltage 2500 V