User's Manual

Chapter 1 — Using the CS40
4 CS40 Mobile Computer User’s Manual
About the CS40 Battery
The CS40 uses a battery pack (Model 1005AB01) as its main power
source.
Charging the Battery
You need to fully charge the battery before using your CS40 for the
first time.
DX2 Dual Base
(Model 1002UU01)
and DX4 Quad Base
(Model 1002UU03)
Use these charger bases with the:
• CS40 cup (Model 1002UC06) to charge two or
four batteries while they are installed in the CS40.
• CS40 battery cup (Model 1002UC05) to charge
charge two or four batteries.
Vehicle Power
Adapter (Model
9005AX01)
Use the vehicle power adapter to provide power to the
CS40 from your vehicle.
Power and Data
Y-Cable
Use the power and data y-cable to provide power to
your CS40 from an external power supply and
provide USB communications with your PC.
Vehicle Holder Use the vehicle holder to hold your CS40 while you
are using it in a vehicle.
Holster and Purse
Holster
Use the holster accessories to carry your CS40 when
you are not using it.
CS40 Accessories (continued)
Accessory Description
The battery used in this device may present a fire or chemical
burn hazard if it is mistreated. Do not disassemble it, heat it
above 100°C (212°F) or incinerate it. Dispose of used batteries
promptly. Keep away from children.
Note: If the CS40 is not using external power and you remove the
battery pack, the CS40 goes into a power off state and then cold boots.