User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 1 — Using the CS40
CS40 Mobile Computer User’s Manual 5
To charge the battery
• Use one of the charging accessories listed in the next table.
Replacing the Battery
The CS40 resets when you remove the battery.
To replace the battery
1 Save your files and close any open applications.
2 Tap Start > Shutdown to turn off the CS40.
3 Push the battery release tab forward until the battery releases, and
lift the battery away from the CS40.
Charging Times for the CS40 Battery
Accessory Charging Time
Universal cell phone charger 4 hours
DX1 desktop dock and CS40 cup 6 hours
DX1 desktop dock and CS40 battery cup 6 hours
DX2 or DX4 base and CS40 cup 6 hours
DX2 or DX4 base and CS40 battery cup 6 hours
Vehicle power adapter
Data and power y-cable variable*
* When you charge your CS40 from your PC, the charge time depends on
the amount of power provided by the USB port on your PC.