User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 1 — Using the CS40
6 CS40 Mobile Computer User’s Manual
4 Insert the bottom of a fully charged battery into the CS40, and
press down firmly on the top of the battery. Make sure that the
battery release tab is fully engaged.
About Battery Status
Use the battery icon to see the power status of your battery.
Use the battery status LED to see the charging status of your battery.
Battery Icon Status
Icon Status
Battery is fully charged.
Battery has a medium charge. You should be able to work for several
more hours before changing batteries.
Battery is low. You need to charge or replace the battery soon.
Battery is critically low. You need to replace the battery now.
Battery is charging.
Battery Status LED States
LED State Description
Steady green The CS40 is connected to a charger and the battery is more
than 95% charged.
Blinking red The battery is low. The CS40 goes into Suspend mode.
Charge or replace the battery.
Steady red The CS40 is connected to a charger and the battery is
charging.
Steady amber There is a battery error. The battery may be outside the
allowable charging temperature or you may need to replace
the battery.
Off The CS40 is not on external power and the battery is
operating normally.