User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 1 — Using the CS40
CS40 Mobile Computer User’s Manual 9
Entering Characters on the QWERTY Keypad
You need to use the orange modifier key b and the Shift key [ to
access all characters and functions.
To type a character
• Press the key for the character.
To type a character or access a function on the overlay
1 Press b. The key status LED turns orange.
2 Press the key for the character or function.
To only type characters or access functions on the overlay
• Press b twice. The key status LED turns orange and stays on.
To type uppercase letters
1 Press b [ to turn on Caps Lock. The key status LED turns green.
2 Press the key for the character.
Caps Lock stays on until you press b [ again.
While Caps Lock is on:
• you can type orange modifier characters by pressing b and the
key for that character.
• you can type lowercase letters by pressing [ and the key for the
character.
For information on how to enter specific characters with keystrokes,
see Appendix C, “Keypads and Keystrokes.”
Entering Characters on the Numeric Keypad
You need to use the orange modifier key b and the green modifier key
c to access all characters and functions.
To type a character
• Press the key for the character.