User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 1 — Using the CS40
CS40 Mobile Computer User’s Manual 11
To adjust the volume
1 Tap the Volume ( ) icon at the top of the screen, and then tap
the volume icon from the menu.
2 Use your stylus or the u and d keys to adjust the volume slider to
the volume you want, select Vibrate, or select Off.
Configuring Backlight Settings
You can turn on the backlight to see the screen better, or you can turn
off the backlight to help conserve battery power.
To turn the backlight on and off
• If you have a QWERTY keypad, press f.
• If you have a numeric keypad, press b ..
By default, the CS40 goes into Screen Off mode when there is no
activity. Screen Off mode turns off the backlight and display. Press a
key or tap the screen to resume activity.