User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 1 — Using the CS40
12 CS40 Mobile Computer User’s Manual
To configure the backlight
1 Tap the Battery ( ) icon at the top of the screen, and then tap the
battery icon from the menu.
2 With Turn off backlight if device is not used for checked, select
the timeout value (30 seconds, or 1 to 5 minutes).
About the Status LEDs
The CS40 has four status LEDs.
Location of the Status LEDs
Status LED Descriptions
LED Color Description
Notification Amber The computer is notifying you of a pending alarm
or message.
Good Read Green The computer has successfully decoded a bar code.
Battery See “About Battery Status” on page6.
Key Status Green Caps Lock is enabled (QWERTY keypad).
Green function keys are enabled (numeric keypad).
Amber Orange function keys are enabled.
Notification LED
Key Status LED
Battery Status LED
Good Read LED