User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 1 — Using the CS40
CS40 Mobile Computer User’s Manual 17
Saving Pictures and Videos to an SD Card
Pictures and videos are automatically saved to the main memory on
your CS40. You can save your pictures and video to an SD card to
easily transport them to another device.
To save picture and video files to an SD card
1 Install a miniSD card.
2 Tap Start > Pictures & Videos.
3 Tap the camera icon.
4 Tap Menu > Settings.
5 From the Save file to list, select SD card, and tap OK.
Inserting a microSD Card
You can use a microSD card to increase file storage and install
software. The CS40 supports an optional 32 GB maximum capacity
microSD™ card.
To install a microSD card
1 Tap Start > Shutdown to turn off the CS40.
2 Push the battery release tab forward until the battery releases, and
lift the battery away from the CS40.
3 Open the card access door.