User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 2 — Connecting and Configuring the CS40
CS40 Mobile Computer User’s Manual 27
5 Tap Next.
6 For EAP type, select either PEAP or Smart Card or Certificate
from the list and tap Finish. You return to the Configure Wireless
Networks page.
7 Use the u and d arrow keys to select your network from the list
and tap Connect.
8 When prompted, enter this network information:
• User name
• Password
9 Tap OK. Your CS40 connects to the network.
10 Make sure that your CS40 is talking to the network and that the
network can see your CS40. If you are connected to the wireless
network, a connected icon ( ) appears on the navigation bar and
the name of your network appears next to Wi-Fi in the Wireless
Manager.
Connecting the CS40 Using Bluetooth Communications
Your CS40 is Bluetooth™-enabled, which lets you connect to other
Bluetooth devices, such as printers.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.