User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 2 — Connecting and Configuring the CS40
28 CS40 Mobile Computer User’s Manual
To turn on the Bluetooth radio
1 Tap Start > Settings > Bluetooth > Mode.
2 Tap the Turn on Bluetooth check box.
3 (Optional) If you want your CS40 to be visible to other Bluetooth
devices, tap Make this device visible to other devices.
4 Tap ok.
The Bluetooth radio maintains its current state through a warm or
cold boot and maintains virtual COM ports. If you clean boot your v,
you need to recreate pairings to devices.
Connecting the CS40 to a Wireless Printer
To configure your CS40 for Bluetooth wireless printing, you need to:
• make sure Bluetooth power is on. For help, see the procedure in
“Connecting the CS40 Using Bluetooth Communications” on
page27.
• create an application that opens the wireless printing COM port
on your CS40. For help, see the Bluetooth Resource Kit, which is
part of the Intermec Developer Library (IDL), available from the
Intermec web site at www.intermec.com/idl.
• select the current wireless printer on your CS40. For help, see the
next procedure.