User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Chapter 2 — Connecting and Configuring the CS40
CS40 Mobile Computer User’s Manual 31
Turning On the Phone Using the Wireless Manager
You can use the Wireless Manager to enable and disable Bluetooth,
Wi-Fi, and the phone on your CS40.
To turn on the phone using the wireless manager
1 Tap Start > Settings > Connections > Wireless Manager >
Enable > Phone. The phone turns on.
2 Tap the Personal tab, and then tap Phone to configure the
phone. For help, see the next procedure, “Activating the UMTS
Radio.”
3 Tap Done to close the Wireless Manager.
Activating the UMTS Radio
You use a SIM card to activate the UMTS/HSPA phone on your CS40.
You can purchase the SIM card from your network provider.
To install the SIM card and activate the UMTS radio
1 Tap Start > Shutdown to turn off the CS40.
2 Push the battery release tab forward until the battery releases, and
lift the battery away from the computer.
3 Open the card access door.