User's Manual

Chapter 3 — Developing and Installing Applications
38 CS40 Mobile Computer User’s Manual
For more information, go to the Intermec web site at
www.intermec.com/SmartSystems.
Installing Applications Using Microsoft ActiveSync or
Windows Mobile Device Center
If you only have a few CS40s to update with applications, you can
copy files using Microsoft ActiveSync or Windows Mobile Device
Center.
To install an application using Microsoft ActiveSync or Windows
Mobile Device Center
1 On your PC, copy the .cab file you want to download to your CS40.
2 Create an ActiveSync or Windows Mobile Device Center
connection between your PC and your CS40.
3 Copy the .cab files from your PC to your CS40.
4 Warm boot or cold boot your CS40. For help, see “Resetting the
Computer” on page 50.
5 After the boot process is finished, browse to the .cab files and tap
the files to install them.
How to Install Applications Using a Scan-to-Connect Bar
Code
You can use the Scan-to-Connect function in SmartSystems
Foundation to create a bar code that loads software. The bar code
contains the address of the server where the software to download is
located. Once you scan the bar code, it finds the server, downloads the
file, and installs it on your CS40. For more information on installing
applications using a Scan-to-Connect bar code, see the SmartSystems
Foundation Help.
Installing Applications Using a microSD Card
If your application requires more disk space than your CS40 can
comfortably handle, you can use a microSD card to install
applications.