User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CS40
- About the CS40 Mobile Computer
- Overview of CS40 Features
- CS40 Accessories
- About the CS40 Battery
- About the Keypad
- Adjusting the Volume
- Configuring Backlight Settings
- About the Status LEDs
- About the Imager
- About Bar Codes
- About the Color Camera
- Inserting a microSD Card
- How to Enable the Integrated GPS on the CS40
- Chapter 2 - Connecting and Configuring the CS40
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Appendix D - Imager Configuration Bar Codes
Appendix B — Default Settings
60 CS40 Mobile Computer User’s Manual
Default Configuration
The following tables list the default values of the configuration
commands supported on the mobile computer. If you restore the
computer to factory default settings, the computer uses these values.
The commands are grouped by function and reflect the organization
of Intermec Settings. You can configure your computer with Intermec
Settings from the SmartSystems Foundation console. For detailed
information on most of the commands, see the Intermec Settings
Command Reference Manual.
Data Collection
Symbology Settings
Symbology Default Value
AustraliaPost Disable
Aztec Disable
BPO Disable
CanadaPost Disable
ChinaPost Disable
Codabar Disable
Codablock A Disable
Codablock F Disable
Code 11 Disable
Code 39 Enable
Code 93 Disable
Code 128/GS1-128 Enable
DataMatrix Enable
DutchPost Disable
EAN/UPC Enable UPC A, UPC E,
EAN 8, EAN 13
GS1 Composite Disable
GS1 DataBar Expanded Disable
GS1 DataBar Limited Disable
GS1 DataBar Omnidirectional Disable