User Manual
Table Of Contents
- Before You Begin
- Using the CN4
- Connecting and Configuring the CN4
- Connecting to a PC
- Configuring the CN4 Parameters
- Configuring the Phone
- Configuring the CN4 for Your Network
- Configuring Wireless Security
- Developing and Installing Applications
- Troubleshooting and Maintaining the CN4
- Specifications
- Default Settings
- Standard Characters
- Index
Chapter 1 — Using the CN4
38 CN4 Series Mobile Computer User’s Manual
Inserting a miniSD Card
5 Close the miniSD/SIM card slot door and insert the two screws.
6 Replace the battery pack and then press the Power button. The
CN4 cold boots.
Setting Up GPS on Your CN4
The integrated Global Positioning System (GPS) receiver in your CN4
delivers standards-based National Marine Electronics Association
(NMEA) data strings to GPS applications. However, Intermec
recommends that you use the GPS Intermediate Driver (GPSID)
instead of directly accessing the GPS hardware. The GPSID is a
Microsoft software component that interacts between applications
and the GPS hardware.
Using the GPSID allows Intermec support for Extended Ephemeris,
which enhances GPS performance by:
• reducing the amount of time it takes your GPS receiver to acquire
a fix.
• eliminating the need to obtain precise satellite data information
from the GPS satellites.
miniSD card slot
To prevent damage to the door, do not overtighten the screws
that secure the card slot door.