User Manual
Table Of Contents
- Before You Begin
- Using the CN4
- Connecting and Configuring the CN4
- Connecting to a PC
- Configuring the CN4 Parameters
- Configuring the Phone
- Configuring the CN4 for Your Network
- Configuring Wireless Security
- Developing and Installing Applications
- Troubleshooting and Maintaining the CN4
- Specifications
- Default Settings
- Standard Characters
- Index
Chapter 2 — Connecting and Configuring the CN4
CN4 Series Mobile Computer User’s Manual 35
Settings and other information can be viewed and changed on the
CN4 by using the Intermec Settings application on the computer.
There are two ways to access Intermec Settings:
• Remotely via Intermec SmartSystems Foundation. When you use
SmartSystems, you can remotely configure all your CN4
computers as well as other SmartSystems-enabled Intermec
computers and peripherals. For more information, see the next
section.
• Directly on the CN4. Using Intermec Settings on the CN4 changes
only the settings on that computer. For more information, see
“Using Intermec Settings Directly On the CN4” on page 36.
Using Intermec Settings Remotely With SmartSystems
Foundation
Intermec’s SmartSystems™ Foundation is a software platform
that lets you manage all of your SmartSystems-enabled devices
simultaneously from a central server. The SmartSystems console
displays all of the SmartSystems-enabled computers in your network.
For more information about SmartSystems Foundation, go to the
Intermec web site at www.intermec.com/SmartSystems.
Your CN4 is SmartSystems-enabled, which lets you open Intermec
Settings from the SmartSystems console to remotely configure all of
your CN4 computers.
To open Intermec Settings from the SmartSystems console
1 In the SmartSystems console, right-click a CN4.
2 Select Intermec Settings.