User's Manual

Chapter 5 — Network Support
128 CN3 Mobile Computer User’s Manual
Activating the Phone
The CDMA phone is activated using the Activation Wizard in the Phone
application. Contact your Intermec representative for more information.
With the WAN radio module installed in your CN3, you can send and
receive telephone calls. Use the speaker on the back of the computer as your
earpiece and use the connector on the bottom of the computer for your
mouthpiece.
To initiate activation before using your Phone application
1 Tap Start > Phone from the Today screen to access the application which
processes your phone calls. Tap the Close button in the upper right
corner of this application to close.
2 In the Phone application, tap Menu > Activation Wizard from the
bottom of the screen.
3 Have your activation code, phone number (MDN), and MSID
information ready before you tap Next to continue. You can get this
information from your network provider.
Note: If you wish to perform this activation another time, tap Cancel to
close this wizard, then tap Yes.