User's Manual

Chapter 5 — Network Support
CN3 Mobile Computer User’s Manual 147
Insert necessary equipment, such as a network card, into the CN3, and
use a desired program to begin connecting.
Ending a Connection
Use any of these methods to end your connection:
• When connected via cable or cradle, detach your CN3.
• When connected via Infrared, move the CN3 away from the other
computer or device.
• When connected via a wireless network, switch off the connection.
iConnect
With iConnect, you can manage these features of your CN:
• FTP server
• Network interfaces
FTP Server
iConnect allows you to:
• enable or disable the FTP server.
• manage the state of the FTP server based on the registry key settings.
iConnect manages the state of the FTP server when iConnect first starts
and when a network change occurs though iConnect.
The easiest way to manage the FTP server is to enable the FTP menu
within iConnect.
To enable the FTP menu
• Create this DWORD registry key and set it to a value of 1:
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\ShowFTPMenu
• When connected via modem or VPN, tap the Connectivity icon on the
top, then tap Disconnect.