User's Manual

Chapter 1 — Using the Computer
CN3 Mobile Computer User’s Manual 15
Using the screen display as a viewfinder, tap move the camera until you get
the image you want, then press Enter or tap the screen to save the image,
similar to the following:
Go to “Configuring the Color Camera” on page 92 for information on
configuring the color camera.
Using the Intermec Settings Applet
Use the Intermec Settings applet to gather, view, and update device
configuration settings. Information about the settings you can configure
with the Intermec Settings applet is in the Intermec Computer Command
Reference Manual available online at www.intermec.com.
To access the Intermec Settings applet
3 When you are done making changes, select File > Save Settings to have
your change take effect, then select File > Exit to close the applet.
1 Tap Start > Settings > the System tab > the Intermec Settings icon to
access the applet.
2 Tap (+) to expand any of the settings, then select any of the subsequent
settings to make changes via drop-down lists or fields.