User Manual

PB3 Mobile Printer User’s Guide 5
4 Close the battery door and slide the latch away from the belt loop
knob to lock the latch.
To remove the battery
• Unlock and open the battery door and tip the printer to one side
to remove the battery.
To charge the battery with the AC adapter/charger
1 Plug the AC adapter into the power connector.
2 Install the appropriate AC plug on the adapter. The adapter comes
with four different plugs suitable for most regions worldwide.
3 Make sure the printer is off and connect the adapter to AC power.
The Battery LED turns on, indicating that the battery is fast
charging.
After about three hours the Battery LED turns off. The battery is
fully charged.
Charging the PB3: The AC adapter/charger charges the battery in about
three hours.
Note: If the other LEDs turn on, press the Power button to turn
the printer off.
12
6
9
3
1
2
7
8
10
11
4
5
Note: The wall mounted charger is Class II equipment. Multiple
plug configurations comply with most international standards.
The wall mounted charger is not supplied with plugs for use in
Korea.