User Manual

PB3 Mobile Printer User’s Guide 13
• connect the PB3 to the host using the optional serial cable
(P/N 5892RJD9-1).
For pinouts, see “Accessories” on page 22.
PB3 With Serial Cable
Changing Printer Connection Settings
Connection settings are changed by the DIP switches located inside
the battery compartment.
Follow the next procedure to change DIP switch settings.
To change printer settings with the DIP switches
1 Open the battery door and remove the battery. The DIP switches
are located inside the battery compartment.
Serial cable
Serial port
To host
computer
Use caution when changing DIP switch settings. Carefully use a
pointer on the dip switch to toggle its position. Do not use a
screwdriver and do not apply excessive force.