User's Manual
Table Of Contents
- Send Feedback
- Before You Begin
- Chapter 1 - About the Computer Features
- About the 70 Series Mobile Computers
- 70 Series Accessories
- About Language Provisioning
- About the Battery
- About the Keypad
- Configure the Screen Backlight
- Configure the Screen Brightness
- Adjust the Volume
- About the Imager
- Use the Imager as a Flashlight
- Read Bar Codes
- Insert a MicroSD Card
- Transfer Files To and From Your PC
- Chapter 2 - About the User Interface and Intermec Applications
- Chapter 3 - Use the Phone
- Chapter 4 - Use the Camera
- Chapter 5 - Use GPS
Chapter 1 — About the Computer Features
32 70 Series Mobile Computer User Manual
5 Slide the microSD card door towards the top of the computer to
unlock it and open the door.
6 Slide the microSD card into place.
7 Close the microSD card door and slide it towards the bottom of the
computer to lock it in place.
8 Close the SIM card door and slide it to the right to lock it in place.
9 Close the card access door and replace the two screws.
10 Install the battery. Press down firmly on the bottom of the battery,
and make sure that the battery release tab is fully engaged.