User's Manual
Table Of Contents
- Chapter 6 - Configure the Computer
- How to Configure the Computer
- Use Intermec Settings on the Computer
- Use Intermec Settings Remotely with SmartSystems
- About Network Communications
- About Wireless Security
- Chapter 7 - Manage the Computer
- Chapter 8 - Troubleshoot and Maintain the Computer
- Appendix A - Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 Physical Dimensions
- CN70e Physical Dimensions
- CK70 Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- 70 Series Non-Incendive Computer Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- EA30 Typical Reading Distances - Extended Reading Range
- EA30 Area Imager Minimum Reading Distances
- EA30 Area Imager Typical Reading Distances
- EV12 Linear Imager Minimum Reading Distances
- EV12 LInear Imager Typical Reading Distances
- EX25 Near-Far Range Imager Minimum Reading Distance
- EX25 Near-Far Range Imager Typical Reading Distance
- Default Configuration
- Physical and Environmental Specifications
- Appendix B - Keypads and Keystrokes
- Appendix C - ScanNGo Wi-Fi Configuration Bar Codes
- Index
Chapter 7 — Manage the Computer
112 70 Series Mobile Computer User Manual
Update Individual Mobile Computers Using a microSD Card
You can transfer upgrade bundles from your desktop PC to your
mobile computer using a storage card. Before you can update your
mobile computer, you need:
• the SmartSystems bundles you want to install. These
SmartSystems bundles are available from the Intermec website at
www.intermec.com. Go to Support > Downloads >
OS/Firmware/Drivers list.
• a microSD card formatted to FAT or FAT32.
After you have located these items, you can update your mobile
computer using a storage card.
1 Download the SmartSystems bundle to your PC and note the
download location.
2 On your desktop PC, navigate to the download location and select
the folder with the correct firmware version. For example,
umts_wwe or umts_tp.
3 Transfer the autoflash.img file into the root directory of the
microSD card.
4 Turn off your mobile computer and install the microSD card in
your mobile computer. For help, see “Insert a MicroSD Card” on
page 30.
5 Turn on your mobile computer.
The update process begins. Your mobile computer may restart
several times during this process. When the update is complete, the
Autoflash Complete message appears.
6 Remove the microSD card.
7 Reboot your mobile computer and follow the setup process.
Note: The SmartSystems console indicates that your mobile
computer is offline, by displaying a red stop symbol, until the
computer reboots and reconnects to the system.
Note: If you do not remove the storage card, the update process
repeats each time the computer reboots.