User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Understanding the User Interface and Intermec Applications
- Chapter 3 - Using the Phone
- Chapter 4 - Using the Camera
- Chapter 5 - Using GPS
- Chapter 6 - Configuring the Computer
- How to Configure the Computer
- Using Intermec Settings on the Computer
- Using Intermec Settings Remotely With SmartSystems Foundation
- About Network Communications
- About Wireless Security
- Chapter 7 - Managing the Computer
- Chapter 8 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 Physical Dimensions
- CN70e Physical Dimensions
- CK70 Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- Default Configuration
- Physical and Environmental Specifications
Chapter 8 — Troubleshooting and Maintaining the Computer
106 70 Series Mobile Computer User’s Manual
To use the Intermec Dashboard to verify the network status:
1 Press the Dashboard (m) button. The Dashboard launches.
2 Tap WiFi to view the details of the WiFi status.
3 Tap Diagnostics. The ISpyWiFi diagnostics screen appears.
The ISpyWiFi tab shows:
• MAC address and IP address of the 802.11 radio.
• network association status, including the SSID and MAC
address of the access point.
• security configuration.
• radio transmit power and signal strength information.
4 Tap the Scan tab to view a list of available 802.11 networks. The list
includes the signal strength, channel, and MAC address for each
network.
• Tap Scan to refresh the screen.
5 Tap the Supp tab to view radio supplicant information, including
a list of supplicant events and authentication status.
• To verify the settings for the currently active security profile, tap
Configure Profile. The Profile Wizard for the active profile
appears.
• To try reconnecting to the network, tap Reconnect.
• To delete the events in the list, tap Clear Events.
6 Tap the Ping tab to run a ping test to the host.
To run a ping test:
a In the Host field, enter the IP address of the host.
b From the Repetitions list, choose the number of times the
computer will ping the host.
c Tap Ping. The graph shows the amount of time it takes for the
host to return the ping. Tap List to see this information in a list
format.