User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Understanding the User Interface and Intermec Applications
- Chapter 3 - Using the Phone
- Chapter 4 - Using the Camera
- Chapter 5 - Using GPS
- Chapter 6 - Configuring the Computer
- How to Configure the Computer
- Using Intermec Settings on the Computer
- Using Intermec Settings Remotely With SmartSystems Foundation
- About Network Communications
- About Wireless Security
- Chapter 7 - Managing the Computer
- Chapter 8 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 Physical Dimensions
- CN70e Physical Dimensions
- CK70 Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- Default Configuration
- Physical and Environmental Specifications
Chapter 1 — Using the Computer
6 70 Series Mobile Computer User’s Manual
Location of the CK70 Status LEDs
Status LED Descriptions
LED Color Description
Notification Amber The computer is notifying you of a pending
alarm or message.
Good Read Green The computer successfully decoded a bar code.
Ready-to-Work Blue Intermec Terminal Emulator (ITE) is running
and connected to the host or the computer is in
a healthy state.
Blinking
blue
ITE is running but not connected to the host or
your computer is in an unhealthy state.
Battery
See “About Battery Status” on page 12.
Key Status Green The Green function key is enabled.
Orange The Orange function key is enabled.
Shift Red The Shift key is enabled.
Shift key
status LED
Green key
status LED
Orange key
status LED
Notification LED
Good Read and Ready-to-Work
status LED
Battery status LED