User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Understanding the User Interface and Intermec Applications
- Chapter 3 - Using the Phone
- Chapter 4 - Using the Camera
- Chapter 5 - Using GPS
- Chapter 6 - Configuring the Computer
- How to Configure the Computer
- Using Intermec Settings on the Computer
- Using Intermec Settings Remotely With SmartSystems Foundation
- About Network Communications
- About Wireless Security
- Chapter 7 - Managing the Computer
- Chapter 8 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 Physical Dimensions
- CN70e Physical Dimensions
- CK70 Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- Default Configuration
- Physical and Environmental Specifications
Chapter 1 — Using the Computer
22 70 Series Mobile Computer User’s Manual
The Power Button Options Screen
Use the following table to understand the Intermec Power Options.
Intermec Power Options
The Intermec Power Options screen is customizable. You can use
Intermec Settings to determine which options are available to end
users, the timeout until the default choice is selected, or to disable the
the Power Options screen. For more information on customizing the
screen using Intermec Settings, see “Using Intermec Settings on the
Computer” on page 60 or see the Intermec Settings Command
Reference Manual.
Option Description
Hibernate The computer powers off all radios and internal devices not
involved in saving the system state.
Reboot The computer shuts down and restarts.
Suspend The computer powers off all radios and internal devices not
involved in saving the system state, but the phone stays on to
receive calls (default).
Cancel The Power Options selection is cancelled.