User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Understanding the User Interface and Intermec Applications
- Chapter 3 - Using the Phone
- Chapter 4 - Using the Camera
- Chapter 5 - Using GPS
- Chapter 6 - Configuring the Computer
- How to Configure the Computer
- Using Intermec Settings on the Computer
- Using Intermec Settings Remotely With SmartSystems Foundation
- About Network Communications
- About Wireless Security
- Chapter 7 - Managing the Computer
- Chapter 8 - Troubleshooting and Maintaining the Computer
- Appendix A - Specifications and Default Settings
- Physical and Environmental Specifications
- CN70 Physical Dimensions
- CN70e Physical Dimensions
- CK70 Physical Dimensions
- CK71 Physical Dimensions
- Environmental Specifications
- Power and Electrical Specifications
- Operating System
- Hardware
- Back Accessory Interface Pin-outs
- Touch Screen Specifications
- Standard Communications
- Wireless LAN
- Regulatory Approvals
- Bar Code Symbologies
- Imager Reading Distances
- Default Configuration
- Physical and Environmental Specifications
Chapter 3 — Using the Phone
50 70 Series Mobile Computer User’s Manual
To turn on the phone using Wireless Center:
1 Tap Start > Settings > Connections > Wireless Center.
2 Tap Phone to turn on the Phone
3 (Optional) To configure the phone, tap Menu in the tile bar at the
bottom of the screen.
4 Tap OKwhen you are done configuring the options.
5 Tap OK to close Wireless Center.
Making a Phone Call
After you activate your phone, you are ready to start making phone
calls.
To make a phone call:
1 Press Phone.
2 Tap the keys to enter the telephone number you want to call, and
tap Talk.
Making an Emergency Phone Call
You can use the UMTS phone to make an emergency phone call even
if the SIM card is missing. When the SIM card is not installed, the
phone will show that you have no service. However, if you dial certain
emergency numbers (such as 112, 911, 000, 08, 118, 119, and 999) the
call will go through.