User's Manual
Table Of Contents
- Using the Data Collection PC
- Safety Information
- About the CV61 Data Collection PC
- Overview of CV61 Features
- About the Ready-to-Work Indicator
- CV61 Accessories
- Mounting the CV61
- Connecting the CV61 to Power
- Installing an SD Card
- 1 Turn off the CV61.
- 2 Remove the power cord.
- 3 Using a small Phillips screwdriver, remove the eight screws that secures the radome cover to the CV61.
- 4 Gently lift up the radome cover to expose the SD card slot.
- 5 Insert the SD card into place.
- 6 Close the radome cover and replace the ten screws.
- 7 Reattach the power cord.
- 8 Press the Power button. The computer turns on.
- Adjusting the Volume
- About the Touch Screen
- Installing an External Antenna
- Attaching an External Keyboard
- Connecting a Tethered Scanner
- 1) Attach the RS-232 cable to one of the COM ports on the CV61.
- 2) Attach the other end of the cable to a tethered scanner.
- 3) Select Start > Control Panel > Intermec Settings.
- 4) Go to Data Collection > Tethered Scanner > Enable Scanner Port.
- 5) Make sure Enable scanner port is checked.
- 6) Tap OK to save your settings.
- 7) Go to Scanner Settings > Scanner model and select your scanner from the list.
- 8) Tap OK to save your settings.
- 9) TapMenu > Exit to exit Intermec Settings.
- 1) Attach the RS-232 cable to one of the COM ports on the CV61.
- Physical and Environmental Specifications
Chapter 1 — Using the Data Collection PC
6 CV61 Data Collection PC User Guide
CV61 Accessories
The CV61 does not ship with any accessories. All accessories are sold
and ordered separately. For help, contact your local Intermec sales
representative.
CV61 Accessories
Blinking The backup battery is low on power.
Off The CV61 is off.
LED Description
Accessory Description
AC Power Supply Use this power supply kit to supply AC
power to the CV61. The AC power supply
comese with a North American power
cord. You need to purchase a
country-specific power cord for your local
power source.
DC/DC (15-96 VDC) Power
Supply
Use this power supply kit with 15-96 V
powered vehicles requiring a 60 V or
higher DC interface.
Desktop Mounting Kit Use the desktop mounting kit to attach
the CV61 to a flat surface such as a
desktop.
Vehicle Mounting Kit Use the vehicle mounting kit to attach the
CV61 to a vehicle such as a forklift or
truck. This kit does not include a power
supply, which can be purchased
separetely. For more information, contact
your local Intermec sales representative.
Keyboard Use the CV61 keyboard to input text. The
keyboard is rugged and has an IP65 seal
rating.
Keyboard Tray Mounting Kit Use the keyboard tray mounting kit to
attach the CV61 keyboard to the CV61.