User's Manual

Windows Mobile 2003Chapter —2
114 700 Series Color Mob ile Computer User’s Manual
Creating an Ethernet Connection to Work
Note: This information does not apply to the 730 Computer.
You do not need to create a new connection on your 700 Color or
700CXL Computer. Instead, purchase a dock to enable on-board Ether-
net. Obtain the user name, password, and domain name from your ISP.
1 If using an on-board Ethernet, place your 700 Color or 700CXL
Computer in a dock, tap Start > Today, then look for the Ethernet icon
(shown left) in the System Tray. If not there, tap the antenna icon for
the NDISTRAY pop-up menu, then select Built-in Ethernet.
2 Tap Start > Settings >theConnections tab > Connections >theAd-
vanced tab > Network Card. Tap “Built-In Ethernet (10Mbps).”
700 Color Screen
730 Screen
700CXL Screen
3 Connect the dock to the network by using a network cable. For infor-
mation, see your owner’s manual.
4 To synchronize your 700 Color or 700CXL Computer, tap Start > Ac-
tiveSync to access Mi crosoft ActiveSync, then tap Tools > Options >
the PC tab, check Sync with this PC during manual sync,andselect
your computer’s name from the Use this PC drop-down list.
Remote synchronization with a desktop works only if a partnership is set
up with that computer through ActiveSync set to allow remote connec-
tions. Other restrictions apply. See ActiveSync Help on your desktop.