User's Manual

Installing Applications—Chapter 3
125700 Series Color Mobile Computer User’s Manual
7 Remove the CompactFlash card from your desktop and reinstall it into
the 700 Color Computer.
8 Warm-boot the 700 Color Computer to add these files to the Compact-
Flash storage card.
If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-
rect, the task manager launches and executes your program on startup.
Copying to a Secure Digital Storage Card
1 Suspend the 700 Color Computer and remove its Secure Digital drive,
which holds a Secure Digital storage card.
2 Using a Secur e Digital Adapter card, place the Secure Digital drive in
your desktop PC card drive.
3 Create a subdirector y on the PCMCIA Secure Digital drive in which to
store your application.
4 Use the CEImager application to add the autorun system to the storage
card. See the Software Tools User’s Manual to learn about CEImager.
5 Copy your application, data files, and all required DLLs and drivers to
thesubdirectorycreatedontheSecureDigitaldrive.
6 Add your application to the AUTOUSER.DAT file on the
“\SDMMC Disk\2577” directory with the following statement:
RUN=\<your directory>\<yourapp.exe>
where your directory is the directory on the Secure Digital storage card
where the application was installed, and yourapp.exe isthenameofyour
application. Finish the “RUN=” statement with a carriage return line-
feed combination. There may be multiple run state ments in the f ile.
7 Remove the Secure Digital card from your desktop and reinstall it into
the 700 Color Computer.
8 Warm-boot the 700 Color Computer to add these files to the Secure
Digital storage card.
If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-
rect, the task manager launches and executes your program on startup.
Updating the System Software
You can use the Intermec Developer’s Library CD to reinstall or update the
operating system software on the 700 Color Computer. For more informa-
tion, contact your Intermec representative.