User's Manual

6 Scanner Support—Chapter
205700 Series Color Mobile Computer User’s Manual
Data Collection Configuration
For Units with PSM Builds Older than 3.00
Scanner settings for the 700 Series Computer can be configured via the
Data Collection control panel applet. From the 700 Series Computer, tap
Start > Settings >theSystem tab > Data Collection.SeeAppendix A,
“Configurable Settings” for more information about the following parame-
ters. Note that these are in alphabetical order.
S Codabar (page 304)
S Code 11 (page 318)
S Code 128 (page 307)
S Code 128 Options (page 308)
S Code 128 FNC1 Character (page 309)
S Code 39 (page 302)
S Code 93 (page 306)
S Code 93 Length (page 306)
S Data Matrix (page 320)
S Interleaved 2 of 5 (page 315)
S Matrix 2 of 5 (page 316)
S MaxiCode (page 321)
S MSI (page 311)
S PDF417 (page 312)
S Macro PDF (page 312)
S Micro PDF417 (page 314)
S Plessey (page 310)
S QR Code (page 319)
S Standard 2 of 5 (page 303)
S Telepen (page 317)
S UPC/EAN (page 305)
For Units With PSM Build 3.00 or Newer
You can configure scanner settings for the 700 Series Computer via the
Intermec Settings contr ol panel applet. From the 700 Series Computer,
tap Start > Settings >theSystem tab>theIntermec Settings icon. See the
Intermec Computer Command Reference Manual (P/N: 073529) for infor-
mation about the settings you can configure with this applet. This online
manual is av ailable from the Intermec web site at www.intermec.com.