User's Manual

Introduction—Chapter 1
7700 Series Color Mobile Computer User’s Manual
Beeper
Note: Each time the 700 Computer is cold-booted, all default settings are
restored.
If the beeper is disabled on your 700 Color Computer, do the following
instructions to enable the beeper. If you are not able to enable the beeper,
then contact Customer Support.
For information about setting volume levels for screen taps, ActiveSync
alert noises, etc., tap Start > Help > Pocket PC Basics , then select
Notifications.
Enable the Beeper
Do the following to enable the beeper:
1 Tap Start > Settings >thePersonal tab > Sounds & Notifications >the
Volume tab.
2 Drag the System volume slider bar to the right off the “Silent” position.
3 Tap ok to exit this applet.