User's Manual

Configurable SettingsAppendix —A
298 700 Series Color Mob ile Computer User’s Manual
Configuration Param eters
A configuration parameter changes the way the 700 Series Color Mobile
Computer operates, such as configuring a parameter to have the 700 Series
Computer emit a very loud beep in a noisy environment. Use any of the
following methods to execute configuration parameters:
S Change Data Collection and SNMP parameters via control panel ap-
plets later in this appendix.
S Send parameters from an SNMP management station. See “SNMP Con-
figuration on the 700 Series Computer” starting on page 191.
S Scan EasySet bar codes. You can use the EasySet bar code creation soft-
ware from Intermec Technologies Corporation to print configuration
labels. Scan the labels to change the scanner configuration and data
transfer settings.
Changing a Parameter Setting
Menus of available parameters for each group are listed. Use the scroll bars
to go through the list. Expand each menu (+) to view its parameter set-
tings. Tap a parameter to select, or expand a parameter (+) to v iew its sub-
parameters.
Note that each parameter or subparameter is shown with its default setting
or current setting in (< >) brackets. Tap a parameter or subparameter to
select that parameter, then do any of the following to change its setting:
Tap Apply to apply any changes. Note that these illustrations are from a
Symbologies parameter.
S Typinganewvalueinanentryfield.
S Choosing a new value from the drop-down list.
S Selecting a different option. The selected option contains a bullet.
S Tap Defaults,thenApply to restore factory-default settings. Tap Yes
when you are prompted to verify this action.