User's Manual

Configurable SettingsAppendix —A
300 700 Series Color Mob ile Computer User’s Manual
Data Collection Control Panel Applet
Note: This applet is not available in units with PSM Build 3.00 or newer.
To determine your PSM Build version, tap Start > Programs >
File Explorer >thePSMinfo text file.
If your unit has PSM Build 3.00 or newer, then you may have the Intermec
Settings control panel applet in place of the Data Collection applet.
Information about the settings you can configure with the Intermec
Settings applet is described in the Intermec Computer Command Reference
Manual. The online manual is available from the Intermec web site at
www.intermec.com.
See “Scanner Control and Data Transfer”intheIntermec Windows CE/
Pocket PC Software Developer’s Kit (SDK) User’s Manual shipped with the
Software Developer’s K it (SDK) f or information about data collection
functions. Note that icons are shown to the left.
To access the settings from the 700 Series Computer, tap Start > Settings
>theSystem tab > Data Collection to access its control panel applet.
Use the left and right arrows to scroll through the tabs along the bottom of
the control panel applet, then tap a tab to access its menus. These tabs rep-
resent the following groups of settings or parameters:
S Symbologies (starting on page 301)
S Symbology O ptions (starting on page 322)
S Beeper/LED (starting on page 330)
S Imager (starting on page 336)
S Virtual Wedge (starting on page 341)