User's Manual

Configurable SettingsAppendix —A
330 700 Series Color Mob ile Computer User’s Manual
Beeper/LED
To access the settings from the 700 Series Computer, tap Start > Settings
>theSystem tab>theData Co llection icon to access its control panel
applet.
Use the right and left arrows to scroll to the Beeper/LED tab, then tap this
tab to access its parameters.
Most of these functions are not available when using an imager. The following
table shows which functions are supported either by an imager or by a
laser scanner.
Beeper Function Imager Laser Scanner
Beeper X
Beeper Volume X
Beeper Frequency X
Good Read Beeps X
Good Read Beep Duration X
The following are parameters for features on the 700 Series Computer.
Note that these are listed in the order of their appearance.