User's Manual

Chapter 1 — Getting Started
6 IP30 Handheld RFID Reader User’s Guide
Charging and Installing the Battery
To charge the IP30 battery, you need to have power supply (P/N
851-082-103), a country specific power cord, and one of these
chargers or accessories:
• AC6 2-Bay Charger (P/N 852-907-001)
• AC7 4-Bay Charger (P/N 852-908-001)
• IP30 Battery Pack Adapter (P/N 871-233-001)
The IP30 does not ship with any of these accessories. For more
information on these accessories, contact your local Intermec
sales representative.
IP30 USB Adapter Port Descriptions
Port Description
Power Connect the CK61 to an external source to
power and charge the CK61. Use power supply
P/N 851-065-005. For North America use
power supply P/N 851-065-105.
Note that this does not charge the IP30. To
charge the IP30 battery see the next section.
COM 1 Connect other RS-232 devices such as printers
to the CK61.
Note: The battery pack adapter is installed onto the AC20
quad charger, or AD20 single charger for the CK3 to charge
the IP30 battery.