User's Manual

Chapter 1 — Getting Started
16 IP30 Handheld RFID Reader User’s Guide
4 Select how you would like to find your reader (the default is
Search) and then click Next. The computer starts discovering
readers.
5 Select the reader you want to connect from the Devices list
and then tap Next.
6 When prompted to add the reader to your device list, tap Yes.
7 In the Passcode text box, enter the passcode for your reader.
The default passcode for Intermec Bluetooth readers is
0000.
8 Tap Next. The computer connects to the reader and displays
the remote device information.
Note: The Devices list will show all data collection devices,
including RFID readers, that are Bluetooth enabled. To
connect to the right reader, verify that the serial number you
selected matches the one located on the bottom of the
IP30’s antenna.