User's Manual

Chapter 2 — Creating and Using RFID Applications
22 IP30 Handheld RFID Reader User’s Guide
Intermec Settings icon. The Intermec Settings window
appears.
2 Tap on RFID > Reader 1 > RFID Module. The RFID
Module screen appears.
3 Change the RFID settings as needed. For help, see the Basic
Reader Interface Programmer’s Reference Manual
(P/N 937-000-xxx) or the Intermec Computer Command
Reference Manual (P/N 073529-xxx).
4 Tap File > Save Settings or tap the ( ) icon to save your
settings.
Configuring the BRI Server
The IP30 BRI server handles communications between your
application and the RFID module. You can configure many
settings for the BRI server. For help, see the next section.
To configure BRI server settings
1 For Windows Mobile, go to Intermec Settings by tapping on
Start > Settings > System > Intermec Settings. The
Intermec Settings window appears.