User's Manual

Chapter 1 — Using the Computer
20 CK3 Mobile Computer User’s Manual
• Choose a Predefined mode in Intermec Settings:
a Tap Start > Settings > the System tab > Intermec Settings.
b Tap Data Collection > Internal Scanner > Imager Settings >
Predefined Modes and then select one of these options:
• If you are scanning multiple bar codes in a small area, use one of
these parameters:
• Aiming beam activation
• Aim triggering mode
• Center decoding
To enable these parameters, use Intermec Settings. For help, see
“Configuring the CK3 With Intermec Settings” on page 27.
For help scanning using center decoding, see the next procedure.
To scan a bar code using center-decoding
1 Press to turn on the CK3.
2 Point the scanner window at the bar code label.
3 Press the Scan button or pull the trigger. The illumination beam
and the laser pointer appear.
Predefined Mode Select if You Are Scanning:
1D Only 1D labels.
1D and 2D
Standard
All types of bar code labels.
1D and 2D Bright
Environment
In high ambient light, such as outdoors in the
sunshine.
1D and 2D
Reflective Surface
Glossy labels.
Custom In conditions that require customized settings.
For more information about these settings,
commands, and parameters, see the Intermec
Settings Command Reference Manual available from
the Intermec web site at www.intermec.com.