User's Manual

Chapter 2 — Connecting and Configuring the CK3
38 CK3 Mobile Computer User’s Manual
7 Select Start > Programs. The ISpyWiFi shortcut appears in the
programs list.
For more information about the ISpyWiFi tabs, see “Understanding
ISpyWiFi” on page 92.
Configuring Wireless Security
The CK3 provides four types of security for your wireless network:
• Wi-Fi Protected Access 2 (WPA2™)
• Wi-Fi Protected Access (WPA)
• 802.1x
• WEP
This section explains how to configure wireless security on your CK3.
If you choose not to use security, see “Disabling Security” on
page 50. Intermec always recommends that you implement security.
You must use either Funk or Microsoft security to implement your
security solution. For details, see the next section, “Choosing
Between Funk and Microsoft Security.”
If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this
section also assumes that your authentication server and
authenticators are properly configured. For more information on
802.1x security, see the MobileLAN™ secure 802.1x Security Solution
Installation Guide (P/N 073134) available at www.intermec.com.
Note: Your security choice does not depend on your authentication
server. For example, you can choose Funk security if you use
Microsoft Active Directory
®
to issue certificates.