User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Connecting and Configuring the CK3
- Connecting to a PC
- Configuring the CK3 Parameters
- Configuring the CK3 for Your Network
- Configuring Wireless Security
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CK3
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Index
Chapter 1 — Using the Computer
CK3 Mobile Computer User’s Manual 5
• Install the battery in the CK3 and insert the CK3 into the AD20
single dock, AD21 ethernet multidock, AD22 charge-only
multidock, or AV10 vehicle dock.
Use the next table to understand how long it takes to charge your
batteries in each of the CK3 charger or dock accessories.
Removing and Installing the Battery
To maximize the time allowed to replace the main battery pack, put
the CK3 in suspend mode before removing the battery pack.
To remove and install the battery
1 Press and hold the Power button for about 2 seconds until the
CK3 turns off.
2 If necessary, remove the handstrap.
3 Press the battery release tab toward the battery until the battery
releases, and then lift it away from the CK3.
4 Insert the battery into the CK3, and press down on the battery
until it clicks into place.
Charging Times for CK3 Batteries
CK3 Charging Accessory AB17 Charging Time AB18 Charging Time
AC20 quad battery charger up to 4 hours up to 6 hours
AD20 single dock up to 4 hours up to 6 to 7 hours
AD21 ethernet multidock up to 4 hours up to 7 hours
AD22 charge-only multidock up to 4 hours up to 7 hours
AV10 vehicle dock up to 4 hours up to 7 hours