User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Connecting and Configuring the CK3
- Connecting to a PC
- Configuring the CK3 Parameters
- Configuring the CK3 for Your Network
- Configuring Wireless Security
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CK3
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Index
Chapter 2 — Connecting and Configuring the CK3
36 CK3 Mobile Computer User’s Manual
2 Select Enable > Ethernet.
3 Configure these network parameters:
• If you have a DHCP server, enable DHCP.
• If you do not have a DHCP server, set these parameters:
a IP address
b Subnet mask
c Default router
4 If necessary, set these parameters:
• Primary and secondary DNS servers
• Primary and secondary WINS servers
5 Make sure that your CK3 is communicating with the network and
that the network can see your CK3.
Using Serial and USB Communications
You can use these CK3 accessories to transmit data to and receive data
from another device through serial or USB communications:
• AD20 single dock
• AV10 vehicle dock
• AA24 USB adapter
• AA21 RS-232 adapter
For more information about these accessories and how to order them,
see “Accessories” on page 90.
Checking the Status of Your Wireless Connection
After you configure your wireless settings, you can use iConnect to
check the status of your connection. You can also use iConnect to
configure the network settings and test the connection of your CK3
against the network.
To check the status of your wireless connection
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.