User's Manual

Chapter 3 — Developing and Installing Applications
64 CK3 Mobile Computer User’s Manual
4 Using the stylus, press the Reset button in the battery
compartment.
5 Press and hold the Power button as you insert the battery back
into the CK3.
6 Continue to hold the Power button until a Warning message
appears on the display.
7 Release the Power button, read the message, and press either
button on the right side to continue.
8 Perform the screen alignment and wait for the CK3 to load files
from the microSD card.
When the progress is complete, the CK3 warm boots to reset the
configuration.
9 Remove the microSD card and delete the files.
10 Set the date, time, and network communication parameters to
reestablish communications with the other devices in the wireless
network.
Upgrading the CK3 Using the SmartSystems Console
You can use the SmartSystems console to upgrade the operating
system on your computer. The console is part of SmartSystems
Foundation and is available from the Intermec web site via the
Intermec Developer Library (IDL). Before you can upgrade your
computer, you need:
• the SmartSystems Foundation. To download SmartSystems
Foundation, go to www.intermec.com/idl and open the Device
Management page.
• the device upgrade .exe file. This file is available from the Intermec
web site at www.intermec.com. Go to Support > Downloads.
Make sure the file you select is for your language.
To upgrade the computer using SmartSystems console
1 Install SmartSystems Foundation on your PC and open the
SmartSystems console.
2 Make sure the SmartSystems console and the computers are on
the same subnet.