User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the Computer
- Chapter 2 - Connecting and Configuring the CK3
- Connecting to a PC
- Configuring the CK3 Parameters
- Configuring the CK3 for Your Network
- Configuring Wireless Security
- Chapter 3 - Developing and Installing Applications
- Chapter 4 - Troubleshooting and Maintaining the CK3
- Appendix A - Specifications
- Appendix B - Default Settings
- Appendix C - Keypads and Keystrokes
- Index
Chapter 3 — Developing and Installing Applications
CK3 Mobile Computer User’s Manual 65
3 Make sure your computers are either in a communications dock or
charging dock or that power management is disabled.
4 Download the device upgrade .exe file to your PC.
5 Double-click the .exe file on your PC. An InstallShield application
starts and walks you through the process of extracting the
upgrade files in the default location.
6 From the SmartSystems console, locate the device upgrade to
install.
7 Drag-and-drop the device upgrade onto each computer you want
to upgrade. The SmartSystems console will tell you that it is
installing the upgrade on your computer.
Once the upgrade is done downloading to your computer, your
computer replaces the operating system and then automatically
performs a cold-boot. Progress messages appear on the computer
screen.
Note: Do not change the default location where InstallShield
extracts the files. The SmartSystems console requires that the files
be in this location.
Note: The SmartSystems console will show your computer as offline
(note the red stop sign) until the computer reboots and reconnects to
the system.