User's Manual

Chapter 4 — Troubleshooting and Maintaining the CK3
CK3 Mobile Computer User’s Manual 69
Troubleshooting Your CK3
Use this section to troubleshoot some common problems you may
experience with your CK3.
Note: If you send the CK3 in for service, it is your responsibility to
save the computer data and configuration. Intermec is responsible
only for ensuring that the hardware matches the original
configuration when repairing or replacing the computer.
Problems While Configuring the CK3
Problem Possible Solution
You scan a
configuration
command, such as
Beeper Volume, and
you hear three low
beeps.and nothing
happens.
If you are working in Intermec Settings, you cannot
scan configuration commands. Exit the application
to scan configuration commands.
You scan or enter
an option for the
Scanner Model
configuration
command, and you
hear three low beeps
and nothing
happens.
You may have scanned or entered a Scanner Model
command that does not apply to the type of scanner
that you have installed. Try scanning or entering the
Scanner Model command again and select an option
for the type of device you are using.