Quick Start Guide

2 IM5 Reader Module Installation and Quick Start Guide

Packing List

Checktoensurethatyoureceivetheseitems:

S Intermec

IM5 Reader Module

S Compliance Statement

S Warranty Card

Host Communication

Host communication comes through the 9-pin female D-sub

connector. RS-232 standards are supported as ordered from the

factory or service center.

S The maximum data rate is 115.2K baud, with 8 data bits, no

parity bit, and 1 stop bit.

S The maximum RS-232 distance from the reader to the host,

modem, or other physical controller interface is 50 feet (15.2

meters).

RS-232 Connections

Pin Number Definition

2 TXD (Transmit Data) to the host

3 RXD (Receive Data) from the host

5 Ground

7 CTS (Clear to Send) from the host

8 RTS (Request to Send) to the host

Power Requirements

Power comes in from 8 to 10 volts DC. Your 915 MHz Reader

uses less than 2.4 amps. Intermec supplies 9 volts DC at 2.4

amps from Intermec power supply, p/n: 851-067-001.