Quick Start Guide

6 IM5 Reader Module Installation and Quick Start Guide
Antenna Installation
1 Connect the antenna cable to a port. The four antenna con-
nectors have lock washers and nuts to allow for panel mount-
ing.
2 Connect a reverse SMA terminator (Intermec p/n
345-004-001) to any port that does not have an antenna at-
tached.
Each port must have either an antenna or a
terminator connected. Do not apply power to the
Reader unless an antenna cable or terminator is
installed on each antenna port.
Antenna ports (4)
Washers (4)
Nuts (4)
Reverse SMA
terminator
Reverse SMA Antenna cable
Reader LED Explanation
LED Meaning
0 Power On
1 Reader communicating with host, LED flashes as data transfer
occurs.
2 Reader searching for tags
3 Reader communicating with a tag, LED flashes as transfer occurs.