Quick Start Guide

IM5 Reader Module Installat ion and Quick Start Guide

Troubleshooting

Doesn’t Recognize Tag

1. Ensure antenna is properly connected.

2. Ensure reader is connected to your computer.

3. Ensure computer is plugged into AC outlet and computer is On.

4. Ensure tag is within range of antenna.

5. Call Intermec Technical Support 1-800-755-5505 (option 2).

Product Specifications

Dependent upon operating conditions and demands expected. If

used in a normal office environment with good read conditions,

you could expect to read up to 60 tags per second. Tags located

too far away or in poor locations, with respect to interfering

objects, provides poor results.

Firmware Architecture

Firmware Spec Detail

Protocol/Compatibility Communicates in three modes: Ap-

plication Peripheral Interface (API)

and Basic Reader Interface

(BRI).ANSI CCITS 256.2000 for

API, part 2, part 3-1

General Specifications

Receiver Spec Detail

Protocol ISO 180006B

Tag data rates 32 kbps

Transmitter Spec Detail

Protocol Intellitag

Transmitter type On/Off Keying

Frequency stability <± 100 ppm from -25° to +55°C

RF Antenna Connections Spec Detail

Number of antennas up to 4, electronically switched

Antenna port isolation ≥22 dB