User's Manual
Table Of Contents
- 074250-003 UG WWAN Communicator.pdf
- Before You Begin
- Getting Started
- Making and Answering Phone Calls
- Sending and Receiving SMS Messages
- Viewing and Working with Call Registers
- Connecting to the Internet
- Viewing and Changing Settings
Chapter 5 — Connecting to the Internet
36 WWAN Communicator User’s Guide
6 Tap a field to select it and enter or change settings information. You can
use the 760 keypad or Communicator’s virtual keypad.
• To use the virtual keypad, tap . For help, see “Using the Virtual
Keypad” on page 8.
You get settings information from your network operator. The next
table describes settings information.
7 Tap . The Advanced Settings screen appears.
If you chose PSD as the Connection
Type, this screen appears.
If you chose CSD as the Connection Type,
this screen appears.
Setting Description
Connection Name A unique name for this connection.
APN Name (PSD only) Access point name.
Country, Area, Phone
Number (CSD only)
The country code, area code, and phone number used for
your connection.
User Name and Password The username and password you want to specify for this
connection.
Extra Cmds
(CSD only)
Extra commands (typically used for an ISDN
connection)