User's Manual
Table Of Contents
- 074250-003 UG WWAN Communicator.pdf
- Before You Begin
- Getting Started
- Making and Answering Phone Calls
- Sending and Receiving SMS Messages
- Viewing and Working with Call Registers
- Connecting to the Internet
- Viewing and Changing Settings
Chapter 6 — Viewing and Changing Settings
46 WWAN Communicator User’s Guide
Changing Call Register Settings
In the Register Settings screen, you can change the available number of
entries in the registers for Missed Calls, Dialed Calls, Received Calls, Data
Connections, SMS Messages, and the Phonebook.
To change call register settings
1 In the Settings main screen, tap . The Register Settings screen
appears.
2 Tap an entry field to select it and enter the new value using the 760
keypad as follows:
• To change the number of available entries in the registers for Missed
Calls, Dialed Calls, and Received Calls, choose the Call registers
field. The default is 50 entries.
• To change the number of available entries in the Data Connections
register, choose the Data call registers field. The default is 50
entries.
• To change the number of available entries in the SMS messages
register, choose the SMS messages field. The default is 50 entries.
• To change the number of available entries in the Phonebook, choose
the Phonebook entries field. The default is 200 entries.
3 To save your changes, tap .
To go back to the Settings main screen, tap .
Note: Although the call registers and Phonebook can hold more entries,
Intermec recommends that you use the default values for best performance.
Note: Changes will be lost if you do not save them before going back to the
Settings main screen.