User's Manual
Table Of Contents
- 074250-003 UG WWAN Communicator.pdf
- Before You Begin
- Getting Started
- Making and Answering Phone Calls
- Sending and Receiving SMS Messages
- Viewing and Working with Call Registers
- Connecting to the Internet
- Viewing and Changing Settings
Chapter 6 — Viewing and Changing Settings
50 WWAN Communicator User’s Guide
5 Tap . The Settings screen for the type of connection you chose
appears.
6 Tap a field to select it and enter or change settings information. You can
use the 760 keypad or Communicator’s virtual keypad.
• To use the virtual keypad, tap . For help, see “Using the Virtual
Keypad” on page 8.
You get settings information from your network operator. The next
table describes settings information.
If you chose PSD as the Connection
Type, this screen appears.
If you chose CSD as the Connection
Type, this screen appears.
Type Description
Connection Name A unique name for this connection, such as
“My Connection.”
APN Name (PSD only) Access point name.
Country, Area, Phone
Number (CSD only)
The country code, area code, and phone
number used for your connection.
User Name and Password The username and password you want to
specify for this connection.
Extra Cmds (CSD only) Extra commands (typically used for an
ISDN connection)